new generation large diesel debuts in paris
Last Updated : GMT 05:17:37
Emiratesvoice, emirates voice
Emiratesvoice, emirates voice
Last Updated : GMT 05:17:37
Emiratesvoice, emirates voice

New generation large Diesel debuts in Paris

Emiratesvoice, emirates voice

Emiratesvoice, emirates voice New generation large Diesel debuts in Paris

Diesel in Paris
Rüsselsheim - Arab Today

High power, high torque, low fuel economy and emissions, all delivered with class-leading refinement: Opel’s new-generation, 2.0-liter turbo diesel ticks every important box. Making its debut in the Insignia and Zafira Tourer at “Mondial de l’Automobile 2014” in Paris (October 4 - 19), this state-of-the-art engine is another major step in the roll-out of Opel’s new powertrain portfolio.Packing 125 kW/170 hp and substantial torque of 400 Nm, it will replace the current 120 kW/ 163 hp 2.0 CDTI engine at the top of Opel’s diesel range. This highly efficient, Euro 6 compliant engine delivers almost five percent more horsepower and 14 percent more torque while reducing fuel consumption and CO2 emissions. Just as important, the engine is also impressively quiet and smooth as a result of Opel’s unwavering focus on ‘sound engineering’ measures to minimize NVH (noise, vibration, harshness).
“This sophisticated engine makes a perfect partner for our top models Insignia and Zafira Tourer,” says Michael Ableson, Vice President Vehicle Engineering Europe. “Its high power density, refinement, frugality and sheer fun-to-drive qualities place it among the very best diesels in its class. With Euro 6 compliance, the new 2.0 CDTI fulfills future requirements today, and it will substantially enhance the appeal of our diesel portfolio.”
Available next year, the new 2.0 CDTI is the first in a new family of large diesel engines developed in-house by a global team of engineers in Turin and Rüsselsheim supported by engineers in North America. It will be manufactured at Opel’s Kaiserslautern engine plant in Germany.
Power density up: Fuel costs and emissions down
Extracting as much energy from as little fuel as possible is key to both power and frugality, and with an exceptional specific output of 85 hp per liter – the same power density as Opel’s new-generation 1.6 CDTI – this engine is big on fun-to-drive but small in its impact on customers’ wallets. Impressive torque of 400 Nm is available from 1,750 to 2,500 rpm, and maximum power of 125 kW/170 hp is accessed at just 3,750 rpm.
Key elements in the performance of the engine are the newly-designed combustion chamber, the re-profiled intake ports and the new fuel injection system with 2,000 bar and up to 10 injections per cylinder cycle. This ensures high power, improved fuel atomization and also contributes to quieter running. The definition of the combustion chamber alone was the subject of more than 80 computer design simulations, before the best five were finally selected for hardware development.
The VGT (variable geometry turbocharger) features an electrical actuator for the variable aspect turbine, giving a 20 percent faster boost response than a vacuum actuator. Exceptionally compact packaging of the VGT and intercooler also minimizes the air volume between the turbocharger and engine, further contributing to a fast boost pressure build up. For durability, the turbocharger is water-cooled and has an oil filter fitted at the oil inlet point to help further reduce wear in the bearing system.
The VGT and exhaust gas recirculation (EGR) module have been designed as a single system for optimal efficiency. The EGR module is based around a new stainless steel radiator concept which provides a near 90 percent cooling efficiency. An integrated, water-cooled EGR bypass valve minimizes pressure drop and its closed loop control offers a significant improvement in NOx/PM trade-off under transient driving conditions, while improving the management of HC and CO emissions.
Smooth running: Diesel power with turbine-like refinement
A consistent improvement in NVH characteristics under all operating conditions was a key requirement for the new engine right from the outset of its design. Several CAE acoustic optimization loops were executed on each component and sub-system even before the first prototype engines were built.
Architectural improvements focused on two high noise emitting areas: the top and bottom of the engine. A new aluminum cylinder head design, including the addition of a decoupled, plastic cam cover with isolated fixings and a sealing gasket, improves noise attenuation. And the intake manifold is also wrapped in a single shell cover made of sound-absorbing material.
At the bottom of the engine, a new balancer shaft module is fitted, made of high pressure die-cast aluminum. It houses two counter-rotating shafts which offset up to 83 percent of secondary order engine vibrations. A helical gear on the crankshaft drives one of the balancer shafts, which is geared to drive the other shaft. Scissor gear control ensures smooth gear teeth meshing, and the elimination of a drive chain removes the risk of rattle noise. After detailed analysis, plain instead of roller bearings were preferred for the balancer shafts to further reduce NVH, as well as weight.
The design of the oil pan is also new. The previous single piece solution is now replaced by a two piece design, with a lower sheet metal pan fixed to an upper section in high pressure, die-cast aluminum. NVH performance was further improved by several analysis loops to acoustically optimize the internal and external ribs of both sections.
Other detailed sound engineering measures to reduce operating noise include:
optimized fuel injection patterns for reduced combustion noise without compromising fuel economy; acoustically-designed ribs in the cast iron cylinder block; individual balancing of the VGT compressor and turbine wheels; improved teeth-meshing on the timing belt and decoupled mounting points for its cover.
As a result of all these design features, the new engine emits less noise than its predecessor throughout its operating range, and is five decibels quieter at idle.
Clean running with Selective Catalytic Reduction (SCR)
The new 2.0 CDTI runs as clean as a gasoline engine with Opel’s BlueInjection selective catalytic reduction (SCR) system, which assures compliance with Euro 6 emissions standards.
BlueInjection is an after-treatment which removes nitrogen oxide (NOx) from the engine’s exhaust gases. Tiny quantities of AdBlue®, a harmless fluid consisting of urea and water, are injected into the exhaust gas flow ahead of the SCR catalyst and downstream of the Diesel Particulate Filter (DPF). The solution is immediately converted into ammonia (NH3), which is absorbed by the SCR catalyst. Nitrogen oxide (NOx) in the passing exhaust gas is then selectively reduced to harmless nitrogen and water vapor in a chemical reaction with the ammonia.
The AdBlue solution, available at filling stations and Opel dealerships, is stored in a tank, which can be topped up as required via a nozzle adjacent to the vehicle’s fuel filler cap.
Source: Opel

Name *

E-mail *

Comment Title*

Comment *

: Characters Left

Mandatory *

Terms of use

Publishing Terms: Not to offend the author, or to persons or sanctities or attacking religions or divine self. And stay away from sectarian and racial incitement and insults.

I agree with the Terms of Use

Security Code*

new generation large diesel debuts in paris new generation large diesel debuts in paris

 



Name *

E-mail *

Comment Title*

Comment *

: Characters Left

Mandatory *

Terms of use

Publishing Terms: Not to offend the author, or to persons or sanctities or attacking religions or divine self. And stay away from sectarian and racial incitement and insults.

I agree with the Terms of Use

Security Code*

new generation large diesel debuts in paris new generation large diesel debuts in paris

 



GMT 09:54 2018 Wednesday ,24 January

'Friendly and kind' N. Korean skaters

GMT 09:36 2017 Thursday ,07 December

Heidy Karam’s contract to present talk show close

GMT 10:50 2012 Friday ,20 January

Dusty weather expected in UAE on Friday

GMT 09:35 2018 Saturday ,13 January

New Zealand bat first in third ODI against Pakistan

GMT 10:48 2017 Saturday ,23 December

Meryl Streep's brand under threat

GMT 06:53 2017 Thursday ,11 May

17th Doha Forum To Begin Sunday

GMT 10:30 2017 Thursday ,23 November

Reports underline proliferation of weapons in Arab world

GMT 07:46 2017 Monday ,30 October

Catch it early, treat it early and move on

GMT 08:05 2015 Tuesday ,17 February

Conan O'Brien is first late night host to film in Cuba

GMT 16:17 2018 Thursday ,30 August

Five Saudi women pilots granted GACA licences
 
 Emirates Voice Facebook,emirates voice facebook  Emirates Voice Twitter,emirates voice twitter Emirates Voice Rss,emirates voice rss  Emirates Voice Youtube,emirates voice youtube  Emirates Voice Youtube,emirates voice youtube

Maintained and developed by Arabs Today Group SAL.
All rights reserved to Arab Today Media Group 2021 ©

Maintained and developed by Arabs Today Group SAL.
All rights reserved to Arab Today Media Group 2021 ©

emiratesvoieen emiratesvoiceen emiratesvoiceen emiratesvoiceen
emiratesvoice emiratesvoice emiratesvoice
emiratesvoice
بناية النخيل - رأس النبع _ خلف السفارة الفرنسية _بيروت - لبنان
emiratesvoice, Emiratesvoice, Emiratesvoice